Fixed gas detection systems warn personnel from the build-up from toxic gases, protects the plant from the risk of explosion of flammable gas, and ensures a safe working environment by monitoring for oxygen depletion.
Level Detection: Microwave sensor for contactless detection of dry bulk solids in containers, pipes or shafts
In modern gasification where syngas composition is paramount for determining the calorific value, the a1-cbiss F-SMS provides an accurate, cost-effective solution to monitoring all major constituents of the gasification process
TDL analyser for cross stack measurements of hydrofluoric acid HF, hydrochloric acid HCl, ammonia NH3, Low and high carbon monoxide CO, Oxygen monitoring O2.
Material Flow Monitoring: Microwave detector for contactless monitoring of gravity fed or pneumatic transfer of material solids for “flow” or “no flow”.
Continuous Flow Measurement at low solid/air ratios: Measuring powder flows in transport lines with very low material concentrations
Level Detection: Microwave sensor for contactless detection of dry bulk solids in containers, pipes or shafts
Multi-compartment baghouse monitoring system for remote observation and identification of bag wear at row level before breaches of environmental emission limits.
The AMESA-D is fast becoming the system of choice for new build energy from waste plants for the continuous sampling of dioxins and furans as standard.
The SM-4 mercury emissions monitoring analyser measures very low levels in flue gases whilst offering high accuracy and reliability.
Approved Ultrasonic sensor for monitoring the flow rate of emissions, stack temperature and pressure from industrial stacks for process control, regulatory flow rate and mass emission reporting (kg/year). QAL1 approved by TUV as specified in EN 15267 and EN 16911-2.
Approved Averaging pitot sensor for monitoring the flow rate of emissions from industrial stacks for process control, regulatory flow rate and mass emission reporting (kg/year). QAL1 approved by TUV as specified in EN 15267 and EN 16911-2.
Approved ElectroDynamicTM Particulate CEMS for measuring dust emissions from industrial stacks. QAL1 approved by TUV and MCERTS as specified in EN 15267.
Approved ProScatterTM Particulate CEMS for measuring dust concentrations from industrial stacks. QAL1 approved by TUV and MCERTS as specified in EN 15267 and compliance with US EPA standard PS-11 for PM-CEMS.
Approved non-intrusive Backscatter Particulate CEMS for measuring dust concentrations from industrial stacks. QAL1 approved by TUV and MCERTS as specified in EN 15267.
A complete "all in one compact" in-situ system for up to 10 multi-gas measurements based on the proven MIR 9000 analyser and on-board SEC sampling system.
An extractive gas analyser measures up to 10 gases simultaneously. Designed to operate under Industrial Emissions Directive (IED). The MIR-9000 offers complete compliance with QAL 1 of EN14181
A free-standing emissions monitoring system that incorporates three monitoring technologies, Chemiluminescence for low-level NOx measurement, Infra-Red GFC for CO, CO2 etc and Paramagnetic for O2.
Using heated IR GFC technology, the MIR 9000H is the ideal extractive multi-gas analyser for measuring wet and corrosive samples - Ammonia (NH3) slip detection and DeNOx (SCR / SNCR)
An MCERTS certified extractive multi-gas analyser provides simultaneous measurement of up to 50 parameters and ideally suited for hot/wet measurement of soluble gases such as HCl, HF, NH3. Offers complete compliance with QAL 1 of EN14181.
The Graphite 52M FID is one of the sole hydrocarbon analysers offering QAL1 certification according to EN 14181
The SM-4 mercury emissions monitoring analyser measures very low levels in flue gases whilst offering high accuracy and reliability.
The AMESA-D is fast becoming the system of choice for new build energy from waste plants for the continuous sampling of dioxins and furans as standard.
Fixed gas detection systems warn personnel from the build-up from toxic gases, protects the plant from the risk of explosion of flammable gas, and ensures a safe working environment by monitoring for oxygen depletion.
Our gas detectors are critical in providing a warning to workers against dangerous levels of oxygen, flammable and toxic gas hazards.
A range of respirators, escape sets, harnesses, fall arrest and confined space entry equipment is available from a1-cbiss.
The portable gas conditioning system (PGCS) is designed to carry out 'on-the-spot' detailed gas analysis at any time in any place.
Our gas detectors are critical in providing a warning to workers against dangerous levels of oxygen, flammable and toxic gas hazards.
A range of respirators, escape sets, harnesses, fall arrest and confined space entry equipment is available from a1-cbiss.
a1-cbiss Data Acquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition and reporting software.